Xerox DocuColor 2240 Service Manual

09/03
2-596
DC 3535/2240/1632, WC M24
102-330, 102-331
Initial issue
Status Indicator RAPs
102-330 Interface with Invalid Parameter LCD
Interface failure. Incorrect parameter was detected at the Drv. I/F between the DM and LCD.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Check the D-RAM and ROM.
If the problem continues, perform re-installation of the software.
102-331 UI Internal with Invalid LED Request
I/F failure in the UI. The request for lighting up an incorrect LED was received.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Check the D-RAM and ROM.
If the problem continues, perform re-installation of the software.

Xerox DocuColor 2240 Specifications

General

Brand	Xerox
Model	DocuColor 2240
Category	All in One Printer
Language	English