09/03
2-351
DC 3535/2240/1632, WC M24
16-709, 16-716
Status Indicator RAPs
Initial issue
16-709 PLW Command
An ART EX Command error has occurred during PLW processing.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Cancel the job and execute the command again.
16-716 Spool TIFF Data
Unable to spool TIFF files because disk capacity is exceeded.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Check HDD (PL 13.1) harness connection.
To Next Page
Loading...
Need help?
General
