09/03
2-357
DC 3535/2240/1632, WC M24
16-741, 16-742
Status Indicator RAPs
Initial issue
16-741 Job Template Connection
Cannot connect to the Job Template Pool Server.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Connect the cable from the M/C to a network correctly.
From the destination server, check that you can identify the M/C with “ping.”
Perform the "ping" test on the destination server from a client PC to check that the FTP con-
nection to the destination server is possible.
16-742 HDD File
File system was full when the Job Template was stored into the local HDD.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Because the scanned images may exceed HDD capacity, rerun the job.
If the problem continues, Initialize the HDD (ADJ 9.8).
If the problem continues, replace the HDD (PL 13.1).
To Next Page
Loading...
Need help?
General
