09/03
2-585
DC 3535/2240/1632, WC M24
102-208, 102-209
Status Indicator RAPs
Initial issue
102-208 Communication Manager Command
Serial communication failure. A command error has occurred when receiving from SIO.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
102-209 EVM Returns Wrong Value
Return value error from EVM. Panel-SW failure
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
To Next Page
Loading...
Need help?
General
