09/03
2-371
DC 3535/2240/1632, WC M24
16-778, 16-779
Status Indicator RAPs
Initial issue
16-778 HDD Capacity
The insufficient HDD capacity was detected during scanned image conversion process by I-
Formatter.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Check HDD (PL 13.1) harness connections and retry scanning.
16-779 Scan Image Conversion
An error has occurred due to other causes than HDD Access during scanned image conver-
sion process by I-Formatter.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Again, switch power off then on and perform the operation again.
To Next Page
Loading...
Need help?
General
