09/03
2-673
DC 3535/2240/1632, WC M24
116-389, 116-390
Status Indicator RAPs
Initial issue
116-389 No Add-On RAM
The necessary expansion RAM was not installed.
Though the system has the configuration requiring the installation of the expansion RAM (with
the HD), it detected that the expansion RAM was not installed.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Install the expansion RAM.
116-390 Standard ROM and NVM Version Mismatch
A mismatch of the versions between the standard ROM and NVM was detected.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Initialize the NVM by following the instructions on the LCD display.
(When the NVM is not to be initialized, use the standard ROM whose version is applicable.)
To Next Page
Loading...
Need help?
General
