09/03
4-104
DC 3535/2240/1632, WC M24
REP 12.2
Initial issue
Repairs and Adjustments
REP 12.2 H Transport Belt
Parts List on PL 17.4
Removal
WARNING
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Remove the H Transport Assembly (REP 12.1).
2. Remove the Entrance Upper Cover (REP 12.17)
3. Remove the input H Transport Roll (Figure 1).
Figure 1 Removing the H Transport Roll (input)
4. Remove the output H Transport Roll (Figure 2).
Figure 2 Removing the H Transport Roll (output)
1
Remove Clips (2)
and Bearings (2)
2
Remove H
Transport
Roll
1
Remove
Clip and
Bearing
2
Remove
Clip, Pulley,
and Bearing
3
Remove H
Transport
Roll
4
Remove the
H Transport
Belts
To Next Page
Loading...
Need help?
General
