09/03
2-684
DC 3535/2240/1632, WC M24
116-745, 116-746
Initial issue
Status Indicator RAPs
116-745 Art Command Error
The decomposer checks the syntax error and excess of each limit value at decomposing.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Correct the command.
Change the ART command where an error has occurred.
116-746 Form synthesis error
The specified form is not registered.
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Use a registered form, or register a necessary form.
To Next Page
Loading...
Need help?
General
