09/03
2-385
DC 3535/2240/1632, WC M24
17-310, 17-941
Status Indicator RAPs
Initial issue
17-310 Network Controller Software Fail
Fatal error in NC software.
Procedure
Refer to the Network Controller service documentation.
17-941 Tray 1 not in position
The Network Controller reports that Tray 1 is not in a ready condition.
Procedure
Check that Tray 1 is closed, and that the paper guides are set correctly. If this does not resolve
the problem, go to the 3-946 RAP.
To Next Page
Loading...
