Xerox DocuColor 2240

09/03
2-400
DC 3535/2240/1632, WC M24
20-502, 20-503
Initial issue
Status Indicator RAPs
20-502 Fax Parameter Error
A required parameter (incoming call number, high layer consistency, ICM board specification)
is not set.
Procedure
Switch power off then on.
Re-try the Fax job
20-503 Fax Parameter Error
A non-supported (other than TEL, G2/G3, or G4) high layer consistency command is present in
the calling request.
Procedure
Switch power off then on.
Re-try the Fax job