09/03
2-603
DC 3535/2240/1632, WC M24
102-344, 102-345
Status Indicator RAPs
Initial issue
102-344 Invalid Type
Invalid type
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel (PL 18.2)
102-345 Timer Queue Full
Timer queue full
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel (PL 18.2)