Xerox DocuColor 2240

09/03
2-609
DC 3535/2240/1632, WC M24
102-356, 102-357
Status Indicator RAPs
Initial issue
102-356 Short of Area
Insufficient area
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel (PL 18.2)
102-357 Cancel Wait Status
Forced cancellation of the wait status
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel (PL 18.2)