1-33
z This command applies to all types of tests except for DHCP and tracert tests.
z The sendpacket passroute command voids the ttl command.
Examples
# Set the TTL of HWPing ICMP test packets to 16.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping administrator icmp
[Sysname-hwping-administrator-icmp] ttl 16
username
Syntax
username name
undo username
View
HWPing test group view
Parameters
name: Username for logging in to an FTP server, a string of 1 to 32 characters.
Description
Use the username command to configure a username for logging in to the FTP server.
Use the undo username command to remove the configured username.
By default, no username for logging in to the FTP server is configured.
Related commands: password, ftp-operation.
z To perform an FTP test successfully, the configured username must be consistent with the
username configured on the FTP server.
z This command applies to FTP tests only.
Examples
# Configure the username for logging into the FTP server in an FTP test as administrator.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] hwping administrator ftp
[Sysname-hwping-administrator-ftp] test-type ftp
[Sysname-hwping-administrator-ftp] username administrator
To Next Page
Loading...
Need help?
General