ST STM32L0x3 User Manual

Reset and clock control (RCC) RM0367
202/1043 RM0367 Rev 7
Bit 31 LPTIM1RST: Low-power timer reset
This bit is set and cleared by software.
0: No effect
1: Resets low-power timer
Bit 30 I2C3RST: I2C3 reset
This bit is set and cleared by software.
0: No effect
1: Resets I2C3
Bit 29 DACRST: DAC interface reset
This bit is set and cleared by software.
0: No effect
1: Resets DAC interface
Bit 28 PWRRST: Power interface reset
This bit is set and cleared by software.
0: No effect
1: Reset power interface
Bit 27 CRSRST: Clock recovery system reset
This bit is set and cleared by software.
0: No effect
1: Resets Clock recovery system
Bits 26:24 Reserved, must be kept at reset value.
Bit 23 USBRST: USB reset
This bit is set and cleared by software.
0: No effect
1: Reset USB
Bit 22 I2C2RST: I2C2 reset
This bit is set and cleared by software.
0: No effect
1: Resets I2C2
Bit 21 I2C1RST: I2C1 reset
This bit is set and cleared by software.
0: No effect
1: Resets I2C1
Bit 20 USART5RST: USART5 reset
This bit is set and cleared by software.
0: No effect
1: Resets USART5
Bit 19 USART4RST: USART4 reset
This bit is set and cleared by software.
0: No effect
1: Resets USART4
Bit 18 LPUART1RST: LPUART1 reset
This bit is set and cleared by software.
0: No effect
1: Resets LPUART1

ST STM32L0x3 Specifications

General

Brand	ST
Model	STM32L0x3
Category	Microcontrollers
Language	English