Xerox DocuColor 2240 - Page 186

09/03
2-153
DC 3535/2240/1632, WC M24
7-933, 7-935
Status Indicator RAPs
Initial issue
7-933 Tray 4 Paper Size Mismatch
The paper in Tray 4 does not match the paper size selected.
Procedure
The machine is equipped with a 3TM.
YN
The correct size paper is loaded in Tray 4 and the paper guides are set correctly.
YN
Ensure Paper Guides are correctly adjusted.
Load the correct size paper.
Go to the 7-277 RAP.
The correct size paper is loaded in Tray 4 and the paper guides are set correctly.
YN
Ensure Paper Guides are correctly adjusted.
Load the correct size paper.
Go to the 7-273RAP.
7-935 Job Continue Not Available
Automatic Tray switching cannot be continued because a tray was not programed.
Procedure
Program the appropriate tray. The problem continues.
YN
Return to Service Call Procedures.
Refer to the User Guide, Section 2, Loading Paper for Auto Tray Switching.