Xerox DocuColor 2240

09/03
2-392
DC 3535/2240/1632, WC M24
17-955, 17-960
Initial issue
Status Indicator RAPs
17-955 ATS/APS Mismatch
The Network Controller reports that, in Auto Tray Select or Auto Paper Select, no paper of the
designated size could be located.
Procedure
Check the paper in the trays. Ensure that the correct paper is loaded in the appropriate trays,
or deselect ATS/APS mode and manually select a tray. If the problem continues, go to the 3-
965 RAP.
17-960 Tray 5 Size Mismatch
The Network Controller reports that the paper in Tray 5 is different than the specified paper
size.
Procedure
Check the paper guides. Ensure that the specified paper is loaded. If the problem persists,
replace the Registration Sensor (PL 2.6).