09/03
2-607
DC 3535/2240/1632, WC M24
102-352, 102-353
Status Indicator RAPs
Initial issue
102-352 Address Alignment
Address mis-alignment
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel (PL 18.2)
102-353 Data Access Exception
Exceptional data access
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel (PL 18.2)
To Next Page
Loading...
Need help?
General
