09/03
2-606
DC 3535/2240/1632, WC M24
102-350, 102-351
Initial issue
Status Indicator RAPs
102-350 Privilege Command
Privilege command
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel (PL 18.2)
102-351 No FPU Exception
Exceptional FPU non-existence
Procedure
Switch power off then on. The problem continues.
YN
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel (PL 18.2)
To Next Page
Loading...
Need help?
General
