Xerox DocuColor 2240 - Page 77

09/03
2-44
DC 3535/2240/1632, WC M24
3-941, 3-942
Initial issue
Status Indicator RAPs
3-941 Insufficient Page Memory
Procedure
Switch the power off then on. The problem continues.
YN
Return to Service Call Procedures.
Perform the operation again.
3-942 Document Size Error
DADF mode: The DADF Document Sensors cannot determine the size of the original.
Platen mode: The APS Sensor cannot determine the size of the original.
Procedure
DAFD mode:
• If the document prefeeds into the DADF before the fault is declared, go to the 5-195 RAP.
• If no prefeed takes place, or if the Feed Motor does not energize, go to the 5-110 RAP.
Platen mode:
• Ensure that the Platen Glass, Lens, and APS Sensor are clean.
• Ensure that the original is correctly registered.