Xerox DocuColor 2240 - Page 78

09/03
2-45
DC 3535/2240/1632, WC M24
3-946, 3-947
Status Indicator RAPs
Initial issue
3-946 Tray 1 Not In Position
Tray 1 not in ready position.
Initial Actions
• Check that the paper size setting is correct.
• Check the Tray 1 Paper Size Sensor for damage or incorrect mounting. Repair or replace
as required.
• Check the switch actuators on Tray 1 for wear or damage. Repair or replace as required
Procedure
Ensure Tray 1 is closed. Switch the power off then on. The problem continues.
YN
Return to Service Call Procedures.
Go to the 7-270 RAP.
3-947 Tray 2 Not In Position
Tray 2 not in ready position.
Initial Actions
• Check that the paper size setting is correct.
• Check the Tray 2 Paper Size Sensor for damage or incorrect mounting. Repair or replace
as required.
• Check the switch actuators on Tray 2 for wear or damage. Repair or replace as required
Procedure
Ensure Tray 2 is closed. Switch the power off then on. The problem continues.
YN
Return to Service Call Procedures.
Go to the 7-271 RAP.