H3C S3100 Series Command Manual

1-6
Idx Type Tx/Rx Modem Privi Auth Int Super
F 0 AUX 0 9600 - 3 N - S
+ : Current user-interface is active.
F : Current user-interface is active and work in async mode.
Idx : Absolute index of user-interface.
Type : Type and relative index of user-interface.
Privi: The privilege of user-interface.
Auth : The authentication mode of user-interface.
Int : The physical location of UIs.
Super: The Super authentication mode of UIs.
A : Authentication use AAA.
N : Current UI need not authentication.
P : Authentication use current UI's password.
S : Authentication use super password.
Table 1-1 Descriptions on the fields of the display user-interface command
Filed Description
+ The user interface is in use.
F
The user interface operates in asynchronous
mode.
Idx The absolute index of the user interface
Type User interface type and the relative index
Tx/Rx Transmission speed of the user interface
Modem Indicates whether or not a modem is used.
Privi Available command level
Auth Authentication mode
Int Physical position of the user interface
Super
The authentication mode used for a user to
switch from the current lower user level to a
higher level, including S, A, SA and AS.
S: Super password authentication
A: HWTACACS authentication
SA: Super password authentication is preferred,
with HWTACACS authentication being a backup
AS: HWTACACS authentication is preferred,
with super password authentication being a
backup
For details about the four authentication modes,
refer to the CLI part of the manual.
A The current user authentication mode is scheme.
N The current user authentication mode is none.
P
The current user authentication mode is
password.
S Super password authentication

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English