4-4
[Sysname-job-phone] time 5 one-off delay 5:00 command undo poe enable
view
Syntax
view view
undo view
View
Scheduled task view
Default Level
3: Manage level
Parameters
view: View name, a string of 1 to 90 characters, used to specify in which view the specified command(s)
in a scheduled task will be executed.
Description
Use the view command to specify a view where the specified command(s) are to be executed.
Use the undo view command to remove the view existing in a scheduled task.
Note that:
z If you do not specify a view for a scheduled task, the command specifies the view; if you have
specified a view for a scheduled task, the command modifies the view.
z You can specify only one view for each scheduled task, and all the commands in the task will be
executed in the view.
Examples
# Specify, and modify a view and then display the configuration.
[Sysname] job saveconfig
[Sysname-job-saveconfig] view Ethernet1/0/2
[Sysname-job-saveconfig] display this
#
job saveconfig
view Ethernet1/0/2
#
return
[Sysname-job-saveconfig] view system
[Sysname-job-saveconfig] display this
#
job saveconfig
view system
#
return
To Next Page
Loading...
Need help?
General