ST STM32L0x3 User Manual

RM0367 Rev 7 195/1043
RM0367 Reset and clock control (RCC)
225
Bits 31:8 Reserved, must be kept at reset value.
Bit 7 CSSLSE: LSE CSS interrupt flag
This bit is set and reset by software to enable/disable the interrupt caused by the Clock
Security System on external 32 kHz oscillator.
0: LSE CSS interrupt disabled
1: LSE CSS interrupt enabled
Bit 6 HSI48RDYIE: HSI48 ready interrupt flag
This bit is set and reset by software to enable/disable the interrupt caused by the HSI48
oscillator stabilization.
0: HSI48 ready interrupt disabled
1: HSI48 ready interrupt enabled
Bit 5 MSIRDYIE: MSI ready interrupt flag
This bit is set and reset by software to enable/disable the interrupt caused by the MSI
oscillator stabilization.
0: MSI ready interrupt disabled
1: MSI ready interrupt enabled
Bit 4 PLLRDYIE: PLL ready interrupt flag
This bit is set and reset by software to enable/disable the interrupt caused by the PLL lock.
0: PLL lock interrupt disabled
1: PLL lock interrupt enabled
Bit 3 HSERDYIE: HSE ready interrupt flag
This bit is set and reset by software to enable/disable the interrupt caused by the HSE
oscillator stabilization.
0: HSE ready interrupt disabled
1: HSE ready interrupt enabled
Bit 2 HSI16RDYIE: HSI16 ready interrupt flag
This bit is set and reset by software to enable/disable the interrupt caused by the HSI16
oscillator stabilization.
0: HSI16 ready interrupt disabled
1: HSI16 ready interrupt enabled
Bit 1 LSERDYIE: LSE ready interrupt flag
This bit is set and reset by software to enable/disable the interrupt caused by the LSE
oscillator stabilization.
0: LSE ready interrupt disabled
1: LSE ready interrupt enabled
Bit 0 LSIRDYIE: LSI ready interrupt flag
This bit is set and reset by software to enable/disable the interrupt caused by the LSI
oscillator stabilization.
0: LSI ready interrupt disabled
1: LSI ready interrupt enabled

ST STM32L0x3 Specifications

General

Brand	ST
Model	STM32L0x3
Category	Microcontrollers
Language	English