1-4
Field Description
VLAN name of VLAN 1 Name of VLAN 1
Auto-negotiation supported
Indicates whether auto-negotiation is supported on the
port.
Auto-negotiation enabled State of auto-negotiation
OperMau Current speed and duplex state of the port
PoE supported Indicates whether PoE is supported on the port.
Power port class
PoE device type, which can be :
z PSE: power sourcing equipment
z PD: powered device
PSE power supported Indicates whether or not the device can operate as a PSE.
PSE power enabled Indicates whether or not the device is operating as a PSE.
PSE pairs control ability
Indicates whether or not the PSE-PD pair control is
available.
Power pairs
PoE mode, which can be
Signal (PoE via signal lines) or Spare
(PoE via spare lines)
.
Port power classification
Port power classification of the PD, which can be:
z Class0
z Class1
z Class2
z Class3
z Class4
Link aggregation supported Indicates whether or not link aggregation is supported.
Link aggregation enabled Indicates whether or not link aggregation is enabled.
Aggregation port ID
Aggregation group ID, which is 0 if link aggregation is not
enabled.
Maximum frame Size Maximum frame size supported
MED information MED LLDP information
Media policy type
Media policy type, which can be:
z unknown
z voice
z voiceSignaling
z guestVoice
z guestVoiceSignaling
z softPhoneVoice
z videoconferencing
z streamingVideo
z videoSignaling
Unknown Policy Indicates whether or not the media policy is unknown.
VLAN tagged Indicates whether packets of the media VLAN are tagged.
Media Policy VlanID ID of the media VLAN
Media Policy L2 priority Layer 2 priority
Media Policy Dscp DSCP precedence
To Next Page
Loading...
Need help?
General