H3C S3100 Series Command Manual

1-6
jitter: Displays the jitter test information.
administrator-name: Name of the administrator who created the HWPing test operation, a string of 1 to
32 characters.
operation-tag: Operation tag, a string of 1 to 32 characters.
Description
Use the display hwping command to display the result of the last HWPing test or the history of
HWPing tests.
Without administrator-name test-operation-tag specified, the command displays the results of all test
groups; without administrator-name test-operation-tag specified, the command displays the results of
the specified test group.
Related commands: test-enable.
Examples
# Display the test results of the test group with administrator name administrator, and operation tag
icmp.
<Sysname> display hwping results administrator icmp
HWPing entry(admin administrator, tag icmp) test result:
Destination ip address:10.2.2.2
Send operation times: 10 Receive response times: 10
Min/Max/Average Round Trip Time: 1/2/1
Square-Sum of Round Trip Time: 13
Last succeeded test time: 2004-11-25 16:28:55.0
Extend result:
SD Maximal delay: 0 DS Maximal delay: 0
Packet lost in test: 0%
Disconnect operation number: 0 Operation timeout number: 0
System busy operation number: 0 Connection fail number: 0
Operation sequence errors: 0 Drop operation number: 0
Other operation errors: 0
Table 1-3 Description on the fields of the display hwping result command
Field Description
Destination ip address Destination IP address
Send operation times Number of probes made
Receive response times Number of received response packets
Min/Max/Average Round Trip Time
Minimum/maximum/average roundtrip time, in
milliseconds
Square-Sum of Round Trip Time Square sum of roundtrip time
Last succeeded test time Completion time of the last successful test
SD Maximal delay Maximum delay from the source to the destination
DS Maximal delay Maximum delay from the destination to the source
Packet lost in test Average packet loss ratio
Disconnect operation number
Number of times the test was disconnected by the
remote end
System busy operation number
Number of times the test failed because the system
was busy
Operation sequence errors Number of out-of-sequence packets received

H3C S3100 Series Specifications

General

Brand	H3C
Model	S3100 Series
Category	Switch
Language	English