Network protocols
7.4 SNMP
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
338 Configuration Manual, 10/2015, C79000-G8976-C351-05
Call up the command with the following parameters:
snmp filterprofile <profile-name> <OIDTree> [mask<OIDMask>]
{included|excluded}[{volatile|nonvolatile}]
The parameters have the following meaning:
Name of the filter profile max. 32 characters
Path information of the MIB tree
Mask that filters access to the elements of
the MIB tree
A series of "0" and "1" separated by
dots in keeping with the path infor-
- Specifies whether the filtered elements are
used or excluded
•
included
•
- specifies whether the settings remain fol-
lowing a restart:
•
volatile (volatile):
The default settings are used after a
restart
•
nonvolatile (non-volatile):
The saved settings are used after a
restart
Note that the meaning of the filter mask changes depending on the "included/excluded"
parameter:
● ...
0... and "included" means: Access denied
● ...
0... and "excluded" means: Access permitted
● ...
1... and "included" means: Access permitted
● ...
1... and "excluded" means: Access denied
The filter is created.
You delete a filter with the no snmp filterprofile command.
You display the created filter with the
show snmp filter table command.
To Next Page
Loading...
Need help?
General
