Security and authentication
10.2 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
395
wlan security ap-radius-authenticator port-number
Description
With this command, you configure the input port of the RADIUS server.
Note
This command is available only in access point mo
de.
You are in the WLAN Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-wlan)#
Call up the command with the following parameters:
wlan security ap-radius-authenticator port-number <index (1-2)> <1-65535>
The parameters have the following meaning:
Index of the RADIUS server
The input port is configured.
You display the setting with the show wlan security ap-radius-authenticator command.
show wlan security ap-radius-authenticator (Access Point) (Page 389)
To Next Page
Loading...
Need help?
General
