Siemens SIMATIC NET

Configuration
3.1 System
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
38 Configuration Manual, 10/2015, C79000-G8976-C351-05
3.1.1.5
show im
Description
This command shows information on device-specific vendor and maintenance data such as
the article number, serial number, version numbers etc.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show im
Result
The information is displayed.
3.1.1.6
show interfaces
Description
This command shows the status and the configuration of one, several or all interfaces.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call up the command with the following parameters:
show interfaces
[{
[<interface-type><interface-id>]
[{description|status}]
|
{vlan<vlan-id(1-4094)>}
}]