Security and authentication
10.2 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
413
wlan security dot1x password (client)
Description
With this command, you specify the password for the RADIUS server.
When assigning the password, ASCII code 0x20 to 0x7e is used.
Note
This command is only available in the client mode.
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-wlan-context-x)#
Call up the command with the following parameters:
wlan security dot1x password <string>
The parameter has the following meaning:
New password Enter the password for the user name. You specify
the user name with the
wlan security dot1x
The password is specified.
You display the settings with the show wlan security command.
To Next Page
Loading...
Need help?
General
