Diagnostics
11.1 Diagnostics
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
436 Configuration Manual, 10/2015, C79000-G8976-C351-05
show events faults config
Description
This command shows the current configuration of the following error monitoring functions:
● Monitoring of the power supply for power outage
● Monitoring of the network connections for a change in the connection status
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call up the command with the following parameters:
show events faults config [{link}]
The parameters have the following meaning:
Monitoring of the network connections for a change in the connection
If no parameters are specified, the settings for error monitoring are displayed.
The current configuration of the selected error monitoring function is displayed.
show events faults status
Description
This command shows the status messages of fault monitoring of the power supply and
network connections.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
To Next Page
Loading...
Need help?
General
