Siemens SIMATIC NET

Network structures
6.1 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
154 Configuration Manual, 10/2015, C79000-G8976-C351-05
6.1.4.3
commit wlan-settings
Description
With this command, you confirm modified WLAN settings. The modified WLAN settings are
then effective on the SCALANCE W700 device.
Requirement
● Manual is set in Commit mode.
You are in the WLAN configuration mode.
The command prompt is as follows:
cli(config-wlan)#
Syntax
Call the command without parameter assignment:
commit wlan-settings
Result
The changes are confirmed and effective.
See also
commit mode (Page 153)
6.1.4.4
country
Description
With this command, you specify the country in which the SCALANCE W700 device will be
used.
Requirement
You are in the WLAN Configuration mode.
The command prompt is as follows:
cli (config-wlan)#