Security and authentication
10.2 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
396 Configuration Manual, 10/2015, C79000-G8976-C351-05
wlan security ap-radius-authenticator primary
Description
With this command, you configure the RADIUS server as primary server.
is available only in access point mode.
You are in the WLAN Configuration mode and the "wlan security ap-radius-authenticator
address" is configured.
The command prompt is as follows:
cli (config-wlan)#
Call up the command with the following parameters:
wlan security ap-radius-authenticator primary <index (1-2)>
The parameter has the following meaning:
Index of the RADIUS server
The RADIUS server is configured as primary server.
You disable the setting with the no wlan security ap-radius-authenticator primary
command.
You display the setting with the
show wlan security ap-radius-authenticator command.
no wlan security ap-radius-authenticator primary (Page 397)
show wlan security ap-radius-authenticator (Access Point) (Page 389)
To Next Page
Loading...
