Siemens SIMATIC NET Configuration Manual

Security and authentication
10.1 User rights management
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
386 Configuration Manual, 10/2015, C79000-G8976-C351-05
10.1.4.2
no user-account
Description
With this command, you delete a user.
Note
Default users "admin" and "user" as well as log
ged in users cannot be deleted.
Requirement
● The user has been created.
● The user has the right to change device parameters.
● You are in the Global Configuration mode.
The command prompt is as follows:
cli(config)#
Syntax
Call up the command with the following parameters:
no user-account <user-name>
The parameter has the following meaning:
Parameter
Description
Range of values / note
user-name
User name
Enter a valid user name.
Result
The user has been deleted.
Further notes
You create a user with the user-account command.
You show the created users with the
show user-accounts command.

Siemens SIMATIC NET Specifications

General

Category	Industrial Communication Software
Manufacturer	Siemens
Operating Systems	Windows, Linux
Protocols Supported	PROFIBUS, PROFINET, OPC UA
Compatibility	Siemens PLCs, Third-party devices with supported protocols