Siemens SIMATIC NET Configuration Manual

Network structures
6.1 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
150 Configuration Manual, 10/2015, C79000-G8976-C351-05
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show wlan ip-mapping
Result
The IP mapping table is displayed.
6.1.2
clear wlan statistics
Description
With this command, you reset the WLAN statistics.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call the command without parameters:
clear wlan statistics
Result
The WLAN statistics are reset.
Further notes
You display the WLAN statistics tables with the show wlan statistics command.

Siemens SIMATIC NET Specifications

General

Category	Industrial Communication Software
Manufacturer	Siemens
Operating Systems	Windows, Linux
Protocols Supported	PROFIBUS, PROFINET, OPC UA
Compatibility	Siemens PLCs, Third-party devices with supported protocols