Network protocols
7.8 ARP
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
363
show ssl server-cert
Description
This command shows the SSL server certificate.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameters:
show ssl server-cert
The SSL server certificate is displayed.
This section describes commands of the Address Resolution Protocol (ARP).
This section describes commands with which you display various settings.
With the command
do [command] you can execute the "show" commands in every
configuration mode.
To do this, you replace
[command] with the "show" command that you want to execute.
do show cli-console-timeout
With this command, you display the IP ARP table.
To Next Page
Loading...
Need help?
General
