Security and authentication
10.2 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
402 Configuration Manual, 10/2015, C79000-G8976-C351-05
no wlan security context (Client)
Description
With this command, you delete a security context.
Note
This command is only available in the client mode.
Note
The security context 1 cannot be deleted.
You are in the WLAN configuration mode.
The command prompt is as follows:
cli (config-wlan)#
Call up the command with the following parameters:
no wlan security context <ID (1-8)>
The parameter has the following meaning:
ID of the security context
The security context is deleted,
You exit with the end or exit command.
You create a security context and change to the security context configuration mode with the
command
wlan security context.
You display the setting with the
show wlan security command.
To Next Page
Loading...
Need help?
General
