Security and authentication
10.1 User rights management
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
383
This section describes commands with which you display various settings.
With the command
do [command] you can execute the "show" commands in every
configuration mode.
To do this, you replace
[command] with the "show" command that you want to execute.
do show cli-console-timeout
show user-accounts
Description
This command shows the created users.
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Call the command without parameters:
show user-accounts
The created users are shown.
This command displays the users that logged on via Telnet or SSH.
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
To Next Page
Loading...
Need help?
General
