Network protocols
7.5 SMTP client
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
353
This section describes commands of the Simple Mail Transfer Protocol (SMTP).
This section describes commands with which you display various settings.
With the command
do [command] you can execute the "show" commands in every
configuration mode.
To do this, you replace
[command] with the "show" command that you want to execute.
do show cli-console-timeout
show events smtp-server
Description
This command shows the configured SMTP servers.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameters:
show events smtp-server
The configured SMTP servers are displayed.
show events sender email
Description
This command shows the configured e-mail sender address.
To Next Page
Loading...
Need help?
General
