Siemens SIMATIC NET Configuration Manual

Network structures
6.2 VLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
221
Syntax
Call up the command with the following parameters:
show vlan[brief|id<vlan-range>|summary]
The parameters have the following meaning:
Parameter
Description
Range of values / note
brief
Shows brief information about all
VLANs
-
id
Keyword for a VLAN or VLAN range
-
vlan-range
Number of the addressed VLAN or
VLAN range
1 ... 4094
summary
Shows a summary of the VLANs
If you do not select any parameter from the parameter list, the entries of all available
interfaces are displayed.
Result
The information for the selected VLAN is displayed.
6.2.1.6
show vlan device info
Description
This command shows all the global information that is valid for all VLANs.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
show vlan device info
Result
The global information is displayed.

Siemens SIMATIC NET Specifications

General

Category	Industrial Communication Software
Manufacturer	Siemens
Operating Systems	Windows, Linux
Protocols Supported	PROFIBUS, PROFINET, OPC UA
Compatibility	Siemens PLCs, Third-party devices with supported protocols