Security and authentication
10.2 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
392 Configuration Manual, 10/2015, C79000-G8976-C351-05
You display the setting with the show wlan security ap-radius-authenticator command.
no wlan security ap-radius-authenticator (Page 392)
show wlan security ap-radius-authenticator (Access Point) (Page 389)
no wlan security ap-radius-authenticator
Description
With this command, you disable the RADIUS server.
Note
This command is available only in access point mode.
You are in the WLAN Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-wlan)#
Call up the command with the following parameters:
no wlan security ap-radius-authenticator <index (1-2)>
The parameter has the following meaning:
Index of the RADIUS server
The RADIUS server is disabled.
You disable the RADIUS server with the wlan security ap-radius-authenticator command.
You display the setting with the
show wlan security ap-radius-authenticator command.
wlan security ap-radius-authenticator (Page 391)
show wlan security ap-radius-authenticator (Access Point) (Page 389)
To Next Page
Loading...
Need help?
General
