Network protocols
7.1 IPv4 protocol
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
298 Configuration Manual, 10/2015, C79000-G8976-C351-05
dcp forwarding
Description
With this command, you configure the forwarding behavior of the interface for DCP frames.
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Call up the command with the following parameters:
dcp forwarding {block|forward}
The parameters have the following meaning:
DCP frames are forwarded
Default:
The forwarding behavior of the interface for DCP frames is configured.
To Next Page
Loading...
