Network structures
6.1 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
162 Configuration Manual, 10/2015, C79000-G8976-C351-05
● The IEEE 802.11n transmission standard is enabled.
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Call up the command with the following parameters:
wlan ampdu bytes-limit <bytes(1024-65535)>
The parameter has the following meaning:
Size of the AMPDU data packet in bytes 1024 to 65535 bytes
The size for the AMPDU data packets is specified.
You display the setting with the show wlan advanced-11n <wlan 0/X> command.
wlan ampdu frames-limit
Description
With this command, you specify the number of individual data packets (frames) grouped
together in one AMPDU data packet.
● The IEEE 802.11n transmission standard is enabled.
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Call up the command with the following parameters:
wlan ampdu frames-limit <frames(2-64)>
To Next Page
Loading...
