Network structures
6.1 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
194 Configuration Manual, 10/2015, C79000-G8976-C351-05
wlan fragmentation threshold
Description
With this command, you specify the maximum packet size transferred on the wireless link.
Large packets are divided up into small packets prior to transmission and then reassembled
into the original size after they have been received.
● The transmission standard 802.11g or 802.11a is set.
● You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-if-wlan-0-X)#
Call up the command with the following parameters:
wlan fragmentation threshold <bytes(256-2346)>
The parameter has the following meaning:
Packet size in bytes 256...2346
The packet size is specified.
You configure the transmission standard with the wlan mode command.
You display the setting with the
show wlan advanced <wlan 0/X> command.
To Next Page
Loading...
Need help?
General
