Diagnostics
11.1 Diagnostics
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
438 Configuration Manual, 10/2015, C79000-G8976-C351-05
Call the command without parameters:
show logbook
or
Call up the command with the following parameters:
show logbook { info | warning | critical }
The parameters have the following meaning:
All log entries of the categories "Information", "Warning" and "Critical" are
All log entries of the categories "Warning" and "Critical" are displayed.
All log entries of the category "Critical" are displayed.
The content of the logbook is displayed.
show power-line-state
Description
This command shows the status of the power supply.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameters:
show power-line-state
The status of the power supply is displayed.
To Next Page
Loading...
Need help?
General
