Network structures
6.3 Spanning Tree
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
270 Configuration Manual, 10/2015, C79000-G8976-C351-05
The parameters have the following meaning:
The transfer of BPDU packets is disa-
Default: disabled
The transfer of BPDU packets is ena-
bled for the port
-
The BPDU transmit status is configured.
spanning-tree bpdu-receive
Description
With this command, you enable or disable the BPDU receive status at the port.
You are in the Interface Configuration mode.
The command prompt is as follows:
cli(config-if-$$$)#
Call up the command with the following parameters:
spanning-tree bpdu-receive{enabled|disabled}
The parameters have the following meaning:
BPDU packets are received at the port
BPDU packets are ignored at the port
The BPDU receive status is enabled or disabled.
You can display the status of this function and other information with the show spanning-tree
interface
command with the detail option.
To Next Page
Loading...
Need help?
General
