Network structures
6.3 Spanning Tree
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
244 Configuration Manual, 10/2015, C79000-G8976-C351-05
The settings for the spanning tree function of the bridge are displayed.
show spanning-tree detail
Description
This command shows the detailed settings of the spanning tree function.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Call the command without parameters:
show spanning-tree detail
The detailed settings for the spanning tree function are displayed.
show spanning-tree interface
Description
This command shows the settings of the ports for the spanning tree function.
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
To Next Page
Loading...
Need help?
General
