Network structures
6.3 Spanning Tree
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
Configuration Manual, 10/2015, C79000-G8976-C351-05
277
With this command, you cancel the assignment of a VLAN to an MST instance or delete the
MST instance.
You are in the MSTP Configuration mode.
The command prompt is as follows:
cli(config-mst)#
Call up the command with the following parameters:
no instance <instance-id (1-64)> [vlan <vlan-range>]
The parameters have the following meaning:
Number of the MST instance
Keyword for a VLAN connection
Range of VLANs that will be deleted
enter the range limts with a hy-
If you specify a VLAN or a VLAN range, the assignment to an MST instance is canceled.
If you do not specify a VLAN, the MST instance is deleted.
The assignment of a VLAN to an MST instance is canceled or the MST instance is deleted.
You assign a VLAN to an MST instance with the instance command.
You display this setting and other information with the
show spanning-tree mst
configuration
command.
To Next Page
Loading...
Need help?
General
