Siemens SIMATIC NET Configuration Manual

Security and authentication
10.2 WLAN
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
412 Configuration Manual, 10/2015, C79000-G8976-C351-05
10.2.4.7
wlan security dot1x username (client)
Description
With this command, you specify the user name for the RADIUS server.
Note
This command is o
nly available in the client mode.
Requirement
You are in the Interface Configuration mode of the WLAN interface.
The command prompt is as follows:
cli (config-wlan-context-x)#
Syntax
Call up the command with the following parameters:
wlan security dot1x username <string>
The parameter has the following meaning:
Parameters
Description
Range of values / note
string
User name Enter the user name for the RADIUS server. You speci-
fy the corresponding password with the
wlan security
dot1x password command.
Result
The user name is specified.
Further notes
You display the settings with the show wlan security command.

Siemens SIMATIC NET Specifications

General

Category	Industrial Communication Software
Manufacturer	Siemens
Operating Systems	Windows, Linux
Protocols Supported	PROFIBUS, PROFINET, OPC UA
Compatibility	Siemens PLCs, Third-party devices with supported protocols