Siemens SIMATIC NET Configuration Manual

Security and authentication
10.1 User rights management
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
382 Configuration Manual, 10/2015, C79000-G8976-C351-05
Result
The password is changed.
Note
Changing the password in Trial mode
Even if you change the passwo
rd in Trial mode, this change is saved immediately.
Further notes
You create a user with the user-account command.
You delete a user with the
no user-account command.
You show the created users with the
show user-accounts command.
10.1.2
whoami
Description
This command shows the user name of the logged in user.
Requirement
You are in the User EXEC mode or in the Privileged EXEC mode.
The command prompt is as follows:
cli> or cli#
Syntax
Call the command without parameters:
whoami
Result
The user name of the logged in user is displayed.

Siemens SIMATIC NET Specifications

General

Category	Industrial Communication Software
Manufacturer	Siemens
Operating Systems	Windows, Linux
Protocols Supported	PROFIBUS, PROFINET, OPC UA
Compatibility	Siemens PLCs, Third-party devices with supported protocols