Siemens SIMATIC NET Configuration Manual

Configuration
3.1 System
SCALANCE W760/W720 to IEEE 802.11n Command Line Interface
46 Configuration Manual, 10/2015, C79000-G8976-C351-05
3.1.4
clear line vty
Description
With this command, you close a console session on the device.
With the
forceful-clear option, you close a session and that is not reacting.
Requirement
You are in the Privileged EXEC mode.
The command prompt is as follows:
cli#
Syntax
Call up the command with the following parameters:
clear line vty {<line-number(2-9)>|all}[forceful-clear]
The parameters have the following meaning:
Parameter
Description
Range of values / note
line-number
Number of the connection that will be
terminated
2 ... 9
all
terminates all connections -
forceful-clear
closes a session that is not reacting
-
Result
The console session is closed.
Further notes
You show the logged-on users with the show users command.

Siemens SIMATIC NET Specifications

General

Category	Industrial Communication Software
Manufacturer	Siemens
Operating Systems	Windows, Linux
Protocols Supported	PROFIBUS, PROFINET, OPC UA
Compatibility	Siemens PLCs, Third-party devices with supported protocols